MP 2852

[Voltage]

Hi guys

If have a machine thats controller board we cannibalized. I ordered a new one and received it today. I inserted the previous boards memory, HHD and NVram and printer/scanner SD card. I boots up but there is no printer option. The scanner option is available aswell as the fax. I might be imagining it but when I go into system settings, it seems to take longer as usual . I did check in the sp mode if the nic was enabled.

Any ideas...

[FMC]

Re: MP 2852

I had this on a brand new machine. Tried new control board, sd card, everything I could think of. Even nicked a board from another machine I knew worked from the same delivery. Didn't make any difference. Gave up and got a tech exchange. Hope thats an option.

[rsyarcia]

Re: MP 2852

Hi guys

If have a machine thats controller board we cannibalized. I ordered a new one and received it today. I inserted the previous boards memory, HHD and NVram and printer/scanner SD card. I boots up but there is no printer option. The scanner option is available aswell as the fax. I might be imagining it but when I go into system settings, it seems to take longer as usual . I did check in the sp mode if the nic was enabled.

Any ideas...

The 512 Memory is a separate option and it is not provided in the kits. do you have this?

[Voltage]

Re: MP 2852

Thanks

Swapped the memory with a other machines and its now working fine.

[rsyarcia]

Re: MP 2852

you're welcome my friend