MPC 7501 PM count

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mikadonovan
    Senior Tech

    Site Contributor
    2,500+ Posts
    • May 2008
    • 2931
    #1

    MPC 7501 PM count

    Is there a page count percentage in the logging data for parts? For instance, if the machine has 450k on it, the hot roller value would be at 100%, since it is rated for 450k. What sp number is that? Also, is there anything on the smc that would tell me the fiery controller is on it?
    I have the entire smc report in front of me, but sc7994 (page count %) is not jiving with sc8999 (admin total count).
    Last edited by mikadonovan; 10-09-2012, 08:21 PM.
    NEVER ASSUME ANYTHING
    Tags: None
    • TonerMunkeh
      Professional Moron

      2,500+ Posts
      • Apr 2008
      • 3865
      #2
      Re: MPC 7501 PM count

      I don't think there are any PM counters in System-SP, the machine has a seperate PM counter section on entering SP modes. The target values can also be changed in there.
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • mikadonovan
          Senior Tech

          Site Contributor
          2,500+ Posts
          • May 2008
          • 2931
          #3
          Re: MPC 7501 PM count

          Forgot to give an update on this one. The reason the smc numbers were not adding up right is because when actually found the mechanical counter on the machine, it had 1.2 mil on it, NOT 350k like the counter sheet said. Sumbitches.
          NEVER ASSUME ANYTHING

            Comment

            Previous template Next
            Working...