MPC2050 Fusing Claws

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299
    #1

    MPC2050 Fusing Claws

    There's no part number for them and the gate where they sit doesn't explicitly show the pawls on it. Can someone please confirm to me if this part includes the separation claws? Or are they available separately and I'm being daft about it?

    fusing_exit_gate_mpc2050.png
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!
    Tags: None
    • banginbishop
      grumpy old git

      500+ Posts
      • Oct 2007
      • 894
      #2
      Re: MPC2050 Fusing Claws

      You have me thinking now but i dont think the mpc range except 6000 + has claws they have stripper bars. Im sure somone will correct me if im wrong.
      Incontinentia Buttocks

        Comment

        • collme
          Ricoh tech

          Site Contributor
          100+ Posts
          • Apr 2010
          • 221
          #3
          Re: MPC2050 Fusing Claws

          Originally posted by banginbishop
          You have me thinking now but i dont think the mpc range except 6000 + has claws they have stripper bars. Im sure somone will correct me if im wrong.
          I second this, no claws on mpc range, just stripper bars.

            Comment

            • mrwho
              Major Asshole!

              Site Contributor
              2,500+ Posts
              • Apr 2009
              • 4299
              #4
              Re: MPC2050 Fusing Claws

              Thanks for the insight, but my question's still valid - I didn't find anything that looks like stripper bars on the parts manual. Either I'm totally daft or they are included on that gate. Can someone confirm either hypothesis to me?
              ' "But the salesman said . . ." The salesman's an asshole!'
              Mascan42

              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
              Ibid

              I'm just an ex-tech lurking around and spreading disinformation!

                Comment

                • TonerMunkeh
                  Professional Moron

                  2,500+ Posts
                  • Apr 2008
                  • 3865
                  #5
                  Re: MPC2050 Fusing Claws

                  There's this one:

                  D039 4232 - Stripper Plate - Coat

                  Fuser.pdf
                  It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

                  Hit it.

                    Comment

                    • Bantams
                      Senior Tech

                      500+ Posts
                      • Jun 2012
                      • 603
                      #6
                      Re: MPC2050 Fusing Claws

                      Never changed one yet but from past experience if in the Description it says Assy it usually is complete Assembly.

                        Comment

                        • CableGuy
                          Impulse Drive Engineer

                          250+ Posts
                          • Oct 2008
                          • 417
                          #7
                          Re: MPC2050 Fusing Claws

                          It's usually the bit that has a spring either end?

                            Comment

                            Previous template Next
                            Working...