LCT RT 43 in aficio mp 6000

[Ronan]

Hello, I have a problem with RT43 LCT, and install it, the machine identifies the LCT but when I get a copy at the entrance locks, change the LCT to another machine and it works but I tried it on several MP 6000 and always the same problem, I have to set something before connecting?

[Jomama46]

Re: LCT RT 43 in aficio mp 6000

Did you change the paper size in SP5959-5?

[Ronan]

Re: LCT RT 43 in aficio mp 6000

Did you change the paper size in SP5959-5?

Yes , SP 5959 - 5 is in 0 = A4 but no works

[Bantams]

Re: LCT RT 43 in aficio mp 6000

You need to change the eprom on the LCT iirc to make it work with the MP6000

[Ronan]

Re: LCT RT 43 in aficio mp 6000

I have to change the EPROM of RT 43 lct? and how do I do that? is a part or is firmware? never happened to me

[tcs04]

Re: LCT RT 43 in aficio mp 6000

there was another thread about 2 (?) weeks ago on the same subject.

[Bantams]

Re: LCT RT 43 in aficio mp 6000

I have to change the EPROM of RT 43 lct? and how do I do that? is a part or is firmware? never happened to me

r_rt43.pdf Heres the RTB about it you need new pcb and eprom.

[Ronan]

Re: LCT RT 43 in aficio mp 6000

ok, I have seen a post that did the same, so the solution is to update the firmware, I have the B473 eprom 5152A, is it possible to upgrade on it. or I have to change the memory by B4735155, thanks to all

[Bantams]

Re: LCT RT 43 in aficio mp 6000

read the bulletin i posted above you need the new eprom and the new main board


The RT43 isnt firmware upgradable the the firmware is on the eprom