savin c2525

[copicatt]

I am not a savin tech but was asked to look at one of these. has marks on copies, prints. the fuser rollers are scratched front to rear, leaving marks. other than that, the quality is great. Can I install new rollers into this or am I gonna have to get the unit? Or is it actually a fixing belt???????

Looking for advice as the unit is $$$$$

Thanks

[sandmanmac]

Re: savin c2525

I am not a savin tech but was asked to look at one of these. has marks on copies, prints. the fuser rollers are scratched front to rear, leaving marks. other than that, the quality is great. Can I install new rollers into this or am I gonna have to get the unit? Or is it actually a fixing belt???????

Looking for advice as the unit is $$$$$

Thanks

Rebuild it. Yes there is a belt, and rollers. You'd better have a manual (oh, Paul??), because there are some very specific instructions for these, or you'll be in some trouble. and if you're going to do it, don't cut corners. Do a full Pm on it, or don't bother.
Just my 2 cents

[copicatt]

Re: savin c2525

Rebuild it. Yes there is a belt, and rollers. You'd better have a manual (oh, Paul??), because there are some very specific instructions for these, or you'll be in some trouble. and if you're going to do it, don't cut corners. Do a full Pm on it, or don't bother.
Just my 2 cents

Hmmm. got me worried now. better find a manual. So there is a pm kit for the fuser?

[JustManuals]

Re: savin c2525

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads




Paul@justmanuals.com

[sandmanmac]

Re: savin c2525

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads




Paul@justmanuals.com

Right on cue Paul!
Fuser Pm Kit P/N PMB230160K