[Misc] How to enter sp mode for printer Ricoh Gx series

[Gesttech]

Hi All

How to enter into the sp mode of printer Gx e7700n. I tried, up & down arrow no good.

Thank

[thierry]

Re: How to enter sp mode for printer Ricoh Gx series

Hi All

How to enter into the sp mode of printer Gx e7700n. I tried, up & down arrow no good.

Thank

Hi Gesttech.

Keep the up and down arrow pressed in at the same time for about 5 seconds. Release and press enter immediately. That will take you into the SP modes.

Good luck!

[JustManuals]

Re: How to enter sp mode for printer Ricoh Gx series

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[sakura]

Re: How to enter sp mode for printer Ricoh Gx series

Press "CLEAR" button first. Then hold arrows UP and DOWN at the same time for about 5 seconds then release then and immediately press "OK" button. You will see 3 lines of commands:
1. don't remember
2. Engine
3. End
You will need #2 "Engine"
Hope it helps.