[Misc] ARDF 3030 bending corners

[CableGuy]

Hi all.
Wanted to find out if anyone else out there is having any issues with DF3030 bending the rear side corners over slightly on single and duplex. I've had a couple now and have so far managed to make them magically dissappear, but one of these days I won't be so lucky. I've had these things in pieces and cannot find anything causing it. Both machines were around a year old and medium volumne. Any ideas would be great.
Happy weekend all

[Bantams]

Re: ARDF 3030 bending corners

Left hinge springs need stretching a little.

[barratec]

Re: ARDF 3030 bending corners

BANTAMS is right!!! the problem is the Left hinge!! I had many issues like that , changing the hinge seems DFs work.

[CableGuy]

Re: ARDF 3030 bending corners

Thanks guys, I will try this the next time I come across it

Cheers

[rsyarcia]

Re: ARDF 3030 bending corners

Put washers on top of the hinge springs.this will add more tension.