Hi, I relly need help here.
The mpc-3002 work perfekt to print what ever when you start up the machin. after about 5minits or so it stopp working. You send a 20kb big document from notpad, and 4kb take 10 secund then next 4kb take about 10minits and the document prints out after about 20minits.
The copier answere to ping quickly...
I hade tried this:
Laptop cross cable, new cable, new drivers, new laptop.
I have tried:
New controllercard,(new HDD, memory).
Lates firmware
My support tell me now to try Nvram and Eprom
any other suggestions?
The mpc-3002 work perfekt to print what ever when you start up the machin. after about 5minits or so it stopp working. You send a 20kb big document from notpad, and 4kb take 10 secund then next 4kb take about 10minits and the document prints out after about 20minits.
The copier answere to ping quickly...
I hade tried this:
Laptop cross cable, new cable, new drivers, new laptop.
I have tried:
New controllercard,(new HDD, memory).
Lates firmware
My support tell me now to try Nvram and Eprom
any other suggestions?