ricoh 1022 No Power - Dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • upperfuser
    • Jul 2025
    #1

    ricoh 1022 No Power - Dead

    Hi, I have a Ricoh 1022 with no power. Checked power to main pcb and it was good. Switch control panel? , interlock? I need help. Thanks in advance, Rob
    Tags: 1022, control panel, dead, power, ricoh
    • Cipher
      It's not easy being green

      1,000+ Posts
      • May 2006
      • 1309
      #2
      Have you checked FU1 and FU2 on the PSU?
      • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

      Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

        Comment

        • upperfuser
          #3
          Hi,

          Sorry for sounding stupid but where are these test points on the PSU? I've never dug this deep into this machine (presenlty Toshiba Dealer). Thanks, Rob

            Comment

            • Jomama46
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Apr 2008
              • 2900
              #4
              Measure directly on the fuse.
              Are you saying you have no display? First you said no power, then you said power to main pcb was OK.
              sigpic
              You never realize how cheap a professional is until after you let an amateur do it.
              A+; Network +; PDI+

                Comment

                Previous template Next
                Working...