H all
was wondeing if anyone out there has come across this problem.
When the paper is fed out of the machine the exit rollers both drive rollers and driven rollers are leaving indents on the page in the feed direction . The preesure of these rollers are controlled by a spring so adjustment is not possible even if i did stretch thm a bit to relese the pressure somewhat but this started givng me jamming issues so i put new springs and rollers in. Looking for hlp as this is a new machine and dont no whether to send the machine back or try a new fuser unit and claim under warranty
Thanks
was wondeing if anyone out there has come across this problem.
When the paper is fed out of the machine the exit rollers both drive rollers and driven rollers are leaving indents on the page in the feed direction . The preesure of these rollers are controlled by a spring so adjustment is not possible even if i did stretch thm a bit to relese the pressure somewhat but this started givng me jamming issues so i put new springs and rollers in. Looking for hlp as this is a new machine and dont no whether to send the machine back or try a new fuser unit and claim under warranty
Thanks