[Error Code] SC 549 can't clear at Ricoh Aficio 2060

[jesrael]

Hello Guys,

I have a Ricoh Af 2060 with a sc 569 error, i cant clear this error.

Already changed the HP Sensor and nothing
Already clean and lube pressure release motor worm gear and nothing

The last error was sc 300, already cleaned with corona changed.

I dont know what to do anymore, please guys, HELP!

[kannuki2]

Re: SC 549 can't clear at Ricoh Aficio 2060

So is it a typo? are you have an SC549 also? ?????
------------------------------------------------------

Anyway, I've had similar issue on a MP6000 a few months ago and it turn out that there were harnesses pinched around the waste collection coil. For sc569, the text said to replace the fusing release motor, release hp sensor, drb board.

The DRB board control the registration motor, duplex inverter motor, duplex transport motor. So output check these motors to see if it spins.. if not then there is the problem. However, that is probably not the culprit.. check your harnesses..... what did you do last ?

[TonerMunkeh]

Re: SC 549 can't clear at Ricoh Aficio 2060

As kannuki has said, check the motor in output mode. Failing that, check the fuser connector for scraps of paper. Are you getting a response from the HP sensor in input mode? If you aren't getting a response from either the motor or sensor, you'll have to bell the harnesses out all the way from the fuser connector to the IOB for continuity.

[Llama God]

Re: SC 549 can't clear at Ricoh Aficio 2060

Isn't SC569 the code you get when you try to remove the fuser before unplugging the connectors on the front for the web and whatnot? The board snaps if you do this.

[TonerMunkeh]

Re: SC 549 can't clear at Ricoh Aficio 2060

Yeah, that's the one. He says he's already replaced the HP sensor though.

[Llama God]

Re: SC 549 can't clear at Ricoh Aficio 2060

Yeah, that's the one. He says he's already replaced the HP sensor though.

Look, I scan over these things and take the bones out. I missed that bone.

So, what you said.

Tosser!

Love you really though, especially your work.

[Masterchief]

Re: SC 549 can't clear at Ricoh Aficio 2060

Good to be back

Have you tried another fuser n the machine?...

What happens when you remove the fuser, reset the code and switch on?..

If my money is on this I would say the lamp is damaged, Considering you have put a meter to all thermostats and replaced the thermistors <===== most probable cause

Masterchief

[JustManuals]

Re: SC 549 can't clear at Ricoh Aficio 2060

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[TonerMunkeh]

Re: SC 549 can't clear at Ricoh Aficio 2060

Good to be back

Have you tried another fuser n the machine?...

What happens when you remove the fuser, reset the code and switch on?..

If my money is on this I would say the lamp is damaged, Considering you have put a meter to all thermostats and replaced the thermistors <===== most probable cause

Masterchief

Where've you been hiding?

[jesrael]

Re: SC 549 can't clear at Ricoh Aficio 2060

Hello guys for help!

I solved the problem just swapping the pressure release motor who stopped!

Thank u guys for helping!