Ricoh MPC4000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • GeorgeBest
    Senior Tech

    500+ Posts
    • Jul 2009
    • 517
    #1

    Ricoh MPC4000

    Hi,

    I do not know if it's possible but a customer wants to know if the following can be set by the driver:

    He wants page 1 and 2 duplex printed from Tray 1, and the remaining pages duplex printed from tray 2. Can this be driven by the driver or
    must it be prgrammed within the software he prints his documents.

    Looked in several drivers, but can't find it .

    Thanks in advance
    Tags: None
    • Eric1968
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2458
      #2
      Re: Ricoh MPC4000

      You can use the MP C3500 PCL 6 driver. This is one of the few drivers that can do this. The recent models don't have that functionality.

        Comment

        • nmfaxman
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2008
          • 1702
          #3
          Re: Ricoh MPC4000

          RPCS driver does it in the Add/ change tab on the preferences page.
          Either slip sheet or chapter.
          Why do they call it common sense?

          If it were common, wouldn't everyone have it?

            Comment

            Previous template Next
            Working...