Savin 2545 drawer 3&4

[tach18k]

I have a Savin 2545, I got the first two drawers working using the drawers paper setting by the green knobs. My other two drawers do not have that configuration. How do I set up the bottom two drawers so the unit see's them and the paper. Right now the screen only show drawers one and two?

[rthonpm]

Re: Savin 2545 drawer 3&4

Make sure that the wiring harness in the back of the additional tray unit is plugged into the mainframe of the machine.

[Llama God]

Re: Savin 2545 drawer 3&4

Make sure that the wiring harness in the back of the additional tray unit is plugged into the mainframe of the machine.

So what you're saying, effectively, is "plug it in" then?

[tach18k]

Re: Savin 2545 drawer 3&4

So what you're saying, effectively, is "plug it in" then?

Thanks , thats was it, I got this unit from a friend and they said they pushed a few buttons and it was gone. Seems someone unpluged it. The small connector was hanging out the back side, But I didnt forgure that was the problem. I'm on day two with this unit so I am learning it as I go.

[rthonpm]

Re: Savin 2545 drawer 3&4

So what you're saying, effectively, is "plug it in" then?

Spot on.

I just had to make it sound a little more technical!