Ricoh MPC4000 duplex printing

[GeorgeBest]

Customer has preprinted paper with header in drawer 1. When you give a single printjob to this drawer, the
text is printed as wanted on the front side (with header).
Why is it that when you print duplex to drawer 1, page 2 of the document is printed on the front (with header) and
page 1 printed on the back side ?

Is this a simple adjustment in the driver to change the printorder so that page 1 is printed on front (with header)

anyone.. . thanks in advance !

[Eric1968]

Re: Ricoh MPC4000 duplex printing

Put the paper with the header faced down in the tray. Set paper type for that tray to Letterhead. In the printer user tools set the Letterhead-setting to automatic. Now every duplex job will print correct on letterhead paper. Every single sided job will also be fed through the duplex unit, so that page 1 will print on the side with the header. Make sure to set the paper type to Letterhead in the printer driver.

[GeorgeBest]

Put the paper with the header faced down in the tray. Set paper type for that tray to Letterhead. In the printer user tools set the Letterhead-setting to automatic. Now every duplex job will print correct on letterhead paper. Every single sided job will also be fed through the duplex unit, so that page 1 will print on the side with the header. Make sure to set the paper type to Letterhead in the printer driver.