LCDC for MPC 2500

[Dumus]

Hey guys,
I have a problem with LCDC on the MPC 2500 (same panel as the MP 2550).
Unresponsive to Touch Screen Adjust, when a Touch Screen Test doit, the point of escaping to some x:-40dota y: -15 dota.
Any proposal
If anyone has the latest firmware for LCDC I would be very grateful: dumus59@gmail.com

[leo34staffs]

Re: LCDC for MPC 2500

Have you re calibrated the touch screen??

If you have and still get the issue, then the issue is the touch screen not he firmware.

[Dumus]

Re: LCDC for MPC 2500

Have you re calibrated the touch screen??

If you have and still get the issue, then the issue is the touch screen not he firmware.

Unresponsive to Touch Screen Adjust, when a Touch Screen Test doit, the point of escaping to some x:-40dota y: -15 dota.

[KenB]

Re: LCDC for MPC 2500

I agree - not a firmware issue.

If recalibrating doesn't fix it, replace it.

This model (along with a few others) are notorious for bad op panels.

[Dumus]

Re: LCDC for MPC 2500

I agree - not a firmware issue.

If recalibrating doesn't fix it, replace it.

This model (along with a few others) are notorious for bad op panels.

uh, uh.
Sorry to interrupt, now I see that there is no firm. for LCDC
In what were you thinking LCDC:
B223 1489 LCD-TFT W-VGA or
B223 1494 Touch Panel - W-vga F
or both to change?
(P.S. my fault not the same with the MP 2550)
Thanks anyway

[sandmanmac]

Re: LCDC for MPC 2500

uh, uh.
Sorry to interrupt, now I see that there is no firm. for LCDC
In what were you thinking LCDC:
B223 1489 LCD-TFT W-VGA or
B223 1494 Touch Panel - W-vga F
or both to change?
(P.S. my fault not the same with the MP 2550)
Thanks anyway

The actual touch panel is the same, and both had the same problem with unresponsive touch panels. The old part # was actaully B223 1484. The new part number for replacements due to this issue is B223 9900.
There must be close to 100 threads about this issue

[Dumus]

Re: LCDC for MPC 2500

The actual touch panel is the same, and both had the same problem with unresponsive touch panels. The old part # was actaully B223 1484. The new part number for replacements due to this issue is B223 9900.
There must be close to 100 threads about this issue

Ok,
can you send me the latest edition threads about this issue of LCDC?
Thanks

[sandmanmac]

Re: LCDC for MPC 2500

Ok,
can you send me the latest edition threads about this issue of LCDC?
Thanks

Excuse me?
I meant 'threads" on this site.
In other words, don't be afraid of "google". But if I must, here's a start. Have a blast:

https://www.google.ca/search?q=mp+c2500+touch+screen+site%3Acopytechnet.com&oq=mp+c2500+touch+screen+site%3Acopytechnet.com&aqs=chrome.0.59j61j60.4897&sugexp=chrome,mod=7&sourceid=chrome&ie=UTF-8

[Dumus]

Re: LCDC for MPC 2500

Excuse me?
I meant 'threads" on this site.
In other words, don't be afraid of "google". But if I must, here's a start. Have a blast:

Sorry for my bad expression on English.
I thought the Ricoh Tech Bulletin