If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
It can't make auto colour registration on Ricoh Afficio 2232c
Re: It can't make auto colour registration on Ricoh Afficio 2232c
Common issue with this model. Check the following:
1. PM life of drums and developer units
2. Clean ID sensors and laser optics (use the toothbrush tool)
3. PM life of the transfer belt
4. Clean the reflective roller at the top of the transfer assembly. The reflection of that roller back to the ID sensor is what gives you your readings.
Re: It can't make auto colour registration on Ricoh Afficio 2232c
Originally posted by copy.eva
We tried inputing the values from the manual that comes with it, and it still cant complete the auto registration.
Thanks
I hope you noted all the original values. Until you repair the faults (transfer rollers, belt etc) fiddling with values may get you out the door for a few hours - BUT YOU WILL BE BACK. And if you have changed those values and you get everything sorted - and the machine passes auto reg, guess what.....your regos will be all over the place. I have had to come in on this type of call a few times where techs have fiddled with the line posn adjustments, it is a friggin nightmare to sort out after.
When you come to one of these that doesnt pass auot reg - you must fix the faults first (overhaul ITB assy) and then it will all fall into place nicely.
Comment