Ricoh 2105

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sulemandw
    Technician
    • Sep 2011
    • 19
    #1

    Ricoh 2105

    Hi Friends
    I have problem in Ricoh 2105 i check toner supply pump motor, and every things is working but slowly the value of VSP is increasing
    so please give me some solution for this problem i try every thing.
    Thanks
    Tags: None
    • Iowatech
      Not a service manager

      2,500+ Posts
      • Dec 2009
      • 3930
      #2
      Re: Ricoh 2105

      Kind of sounds like there is a charge problem on that machine, and the affected drum units might need to be replaced or something. Or that machine's ID sensors might need to be adjusted, cleaned or replaced (maybe the TD sensor should be checked on as well). Or perhaps one or more of the developer units has been run to the end of it's service life, and might need to be replaced.
      Sorry about that, that's the best I can do with the information you shared.
      Still, good luck!

        Comment

        • Tonerbomb
          AutoMajical Resolutionist

          Site Contributor
          2,500+ Posts
          • Feb 2005
          • 2589
          #3
          Re: Ricoh 2105

          This machine moves toner through tubes with suction. Those tubes are known to plug up with toner, stopping toner supply.
          Mystic Crystal Revelations

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838
              #4
              Re: Ricoh 2105

              This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


              Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


              Paul@justmanuals.com

                Comment

                Previous template Next
                Working...