Reassembling of the drive unit for mpc2500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dakke
    Technician
    • Apr 2008
    • 10
    #1

    Reassembling of the drive unit for mpc2500

    Hellow , does anybody know how to place the gears (and motors) on the right way in the drive unit ? They have both an dot on the face but there nothing in the manual how to put this right ?
    A collegea of me have put the wrong pcu in the machine and the female connectors are broken so i have to deassembly the whole drive unit and glue it temporaly in waiting for a new drive unit ....


    thx
    Tags: drive, hellow, mpc2500, nas, unit, wrong
    • Cipher
      It's not easy being green

      1,000+ Posts
      • May 2006
      • 1309
      #2
      Nasty.

      You must of used a fair bit of force to push those connectors in.
      I would wait for the new drive unit to come down to be honest.
      • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

      Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

        Comment

        • henk
          Junior Member
          • Apr 2008
          • 5
          #3
          What is your problem?

          Repairing leaves by your colleague!



          Groeten

            Comment

            Previous template Next
            Working...