Ricoh 1105 SC322

[luig]

Hi Guys,

I have a 1105 that gives me a sc-322 when printing. The customer could use the copy mode, but not the print mode. This is the only one we have left in our arsenal, so I have few Items to swap. I have tried the print controller and door switches. Any suggestion that could point the right way are very much appreciated.

Thanks,

Luigi

[Scott_Lewis]

Hi Guys,

I have a 1105 that gives me a sc-322 when printing. The customer could use the copy mode, but not the print mode. This is the only one we have left in our arsenal, so I have few Items to swap. I have tried the print controller and door switches. Any suggestion that could point the right way are very much appreciated.

Thanks,

Luigi

[iMind]

Hi Guys,

I have a 1105 that gives me a sc-322 when printing. The customer could use the copy mode, but not the print mode. This is the only one we have left in our arsenal, so I have few Items to swap. I have tried the print controller and door switches. Any suggestion that could point the right way are very much appreciated.

Thanks,

Luigi

SC320 and SC322

[luig]

Thank You for your help, it turned out to have a combo problem and the first SICU that I took out had a problem too. Once I replaced the LDU and a "GOOD" SICU the machine was up and running. At least for now.

Thanks again

Luigi