[Error Code] SC 995 WITH AFICIO 2035

[mkopoiuy]

I CHANGED ONE OF BOARD WHICH IS WITH HDD.
AND GOT SC995.
SOLUTION IS CHANGE DIP SW NO.1 on I/O BOARD.
anyone can tell where is that DIP SW.
WHICH ONE IS I/O BOARD?

[HP:guy]

Re: SC 995 WITH AFICIO 2035

I/O pcb is the BICU back of the machine

[mkopoiuy]

Re: SC 995 WITH AFICIO 2035

I/O pcb is the BICU back of the machine

thank you very much.

[techno]

Re: SC 995 WITH AFICIO 2035

by adjusting your dip switch,the speed of the machine will be different,what is your original speed?is it 2035 or 45?

[sandmanmac]

Re: SC 995 WITH AFICIO 2035

by adjusting your dip switch,the speed of the machine will be different,what is your original speed?is it 2035 or 45?

I'm going with 2035 since that's the model listed in the subject line. But that's just a hunch

[mkopoiuy]

Re: SC 995 WITH AFICIO 2035

by adjusting your dip switch,the speed of the machine will be different,what is your original speed?is it 2035 or 45?

2045 is original speed.
and I have 2035 board.
so I have to change dip sw. on I/O board.
but I don't know which board is I/O board.
please pin point where is the dip sw. and I/O board.

[JustManuals]

Re: SC 995 WITH AFICIO 2035

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[sandmanmac]

Re: SC 995 WITH AFICIO 2035

Oh man! I was wrong on the speed from earlier in this thread!.. I wonder if anyone was making wagers? haha
How strange it is though, that the poster was clear and thankful on the circuitry location earlier in the thread, but now he has no idea again? Anyway, it's WAY too late on a Friday to worry about it anymore