I have this Ricoh SP C411dn Printer (uses type 145 supplies) that has a dead display. I swapped it with a known working display from another machine but still it is still dead. Machine powers up and cycles through fine from what i can hear, I just can't see anything on the display. Could anyone tell me if they have seen this? All connections on boards seem fine, no pinched wires. Help greatly appreciated!
-
-
Re: Ricoh SP C411dn Printer with dead display - swapped in a good one but still dead
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Comment