Ok first the image in not skewed. I ran test pattern 14 (border) to check if the copy is straight and this is what I have- lead edge line is straight up and down like the trail edge. Top and bottom are crooked. The only other way I can explain it is take a picture of a square and push down the top right corner of the square a few mm and that's what I have. I have looked all through the service manual to find any kind of adjustment on this but have come up short. I have added an image of what I'm talking about. Any idea's.... I would be very grateful!!!
-
-
Re: Ricoh MPc2000/2500 Skewing image
does it do on both trays? or just tray#1? -
Re: Ricoh MPc2000/2500 Skewing image
Yes, it does it from both trays. But like I stated this is not a skewing problem. If it were the whole image would be skewed. This looks more like a laser problem. I don't think this is a scanner problem because the test pattern is from the HDD and a copy from the scanner is exactly the same.Comment
Comment