Hi.
Another slight problem! I think its the colour registration but when ever I print anything with a solid blue area I have a mm or so light cyan - solid blue - mm or so magenta.
My Scanner is broken so I can't upload a sample however I have drawn what it looks like and attached it here.
Its only ever on the vertical and never effects anything on the horizontal.
I have tried the auto colour registration / calibration but before I start to manually adjust anything I want to make sure I am on the right lines.
The black pcu has 100% life remaining, the colours have 60% life remaining - all other consumables have at least 70% remaining.
Print quality otherwise is A1
I have a service manual - Thanks.
Going to be ringing for a service on Monday - would this be covered as part of the service?
Cheers
Chris
sample.jpg
Another slight problem! I think its the colour registration but when ever I print anything with a solid blue area I have a mm or so light cyan - solid blue - mm or so magenta.
My Scanner is broken so I can't upload a sample however I have drawn what it looks like and attached it here.
Its only ever on the vertical and never effects anything on the horizontal.
I have tried the auto colour registration / calibration but before I start to manually adjust anything I want to make sure I am on the right lines.
The black pcu has 100% life remaining, the colours have 60% life remaining - all other consumables have at least 70% remaining.
Print quality otherwise is A1
I have a service manual - Thanks.
Going to be ringing for a service on Monday - would this be covered as part of the service?
Cheers
Chris
sample.jpg