AF 2027 SC101

[Peter Sim]

Hi all, Need help.
Search around the forum,but can't find the answer.
On the power , the machine scanner was at home position and scanning lamp on for a while and show sc101.
Change exposure lamp ,lamp stabilizer ,SBU and SBCU but the problem remain. Also test the output check the lamp was ok.
Please help.
Thank you in advance.

[Peter Sim]

Re: AF 2027 SC101

Problem solved.
Reseat cable between SBU and IPU board

[mikadonovan]

Re: AF 2027 SC101

Problem solved.
Reseat cable between SBU and IPU board

Thanks for the follow up, and glad you got it fixed. Probably a good thing considering advice on the fix was a little scarce.

[Peter Sim]

Re: AF 2027 SC101

Thanks for the follow up, and glad you got it fixed. Probably a good thing considering advice on the fix was a little scarce.

Yep,It was a little scarce .I change so may thing but the problem remain ,only after i reseat the cable that fix the problem.I observer the machine for a few days and was ok until now .