MP C2550 SC144

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Frank12
    Technician
    • Nov 2008
    • 77
    #1

    MP C2550 SC144

    Hi too,
    Anyone experience this error code.

    Thanks,
    frank
    Tags: None
    • ruben
      The New Guy

      1,000+ Posts
      • Oct 2012
      • 1203
      #2
      Re: MP C2550 SC144

      Have you followed the service manual? Most likely a cable has come loose and needs to be reseated.

        Comment

        • Counsel
          Senior Tech

          500+ Posts
          • Aug 2011
          • 530
          #3
          Re: MP C2550 SC144

          I had this issue after reseating the controller. In my case i got a sc 672 so i checked the norm and reseated the control and ended up with this code and a 101 error. What ended up solving it for me was i found the SIU to IPU connector had a gap if i nudged it with my finger i could trigger the codes, i ended adjusting the bracket and added some some washers behind the SIU board and bracket so that it connected better with the IPU, this was about a month or so ago and haven't had the issue since.

            Comment

            Previous template Next
            Working...