ricoh 2035e a lighter band middle page

[cristian]

I have a easy lighter band 4 cm. at the middle of the page after a scan.This band not appear at printings or copies, only at scannings.
I have cleaned the exposure lamp and the mirrors.Could be some wrong scanner settings?Should I clean the scanner block inside? Resize of scan.jpg

[copymutt]

Re: ricoh 2035e a lighter band middle page

This model does not have a seperate scan glass. Is your light band in the direction of scanner travel or perpendicular to the scan?

Copymutt

[cristian]

Re: ricoh 2035e a lighter band middle page

This model does not have a seperate scan glass. Is your light band in the direction of scanner travel or perpendicular to the scan?

Copymutt

In the direction of the scanner travel.

[copymutt]

Re: ricoh 2035e a lighter band middle page

Assuming you have this occuring on more than one document, if you scan in a reduction or enlargement mode you can determine if its in the optics or not. You can scan to the doc server to see the results. Also if its relegated to a certain type of original try changing from PDF to jpeg or other file type. You should get a clue from these.

Copymutt

[Bantams]

Re: ricoh 2035e a lighter band middle page

This model does not have a seperate scan glass. Is your light band in the direction of scanner travel or perpendicular to the scan?

Copymutt

erm last time I looked it did best clean that first.