MP C2800 BLANK SCREEN

[katash]

Re: MP C2800 BLANK SCREEN

You just need to enter in the machines serial number correctly for the bicu board to clear this sc code. All detailed in the manual for replacing bicu board.

hello turbojetboy already done that but sc995-003 talks about the controller.

thanks and regards

[Polarbear]

Re: MP C2800 BLANK SCREEN

Hi

Seeing that the BICU is already new, the next port of call would be the controller (judging by the sc code).

There are remote instances where a code is generated by something out of the way like a pinched wire or such, which was then caused by the tech or the customer (which no manual will cover!)

Have you checked (and re-checked) that all the connectors on the BICU and the controller are seated properly?

When does the code appear - at startup or as part of the startup or standby routine?

[Klydon]

Re: MP C2800 BLANK SCREEN

A question for the OP.

When you put the new BICU on the machine, did you move the NVRAM chip from the old BICU board to the new one?

[katash]

Re: MP C2800 BLANK SCREEN

A question for the OP.

When you put the new BICU on the machine, did you move the NVRAM chip from the old BICU board to the new one?

hi klydon,

yes i did and entered the serial no. i will did check for pinched wires before i fitted the bicu i have ordered for a new controller just crossing my fingers,will keep you posted!