MP4000 Fusier Web Modification

[sandmanmac]

I have a copy of a document that shows how to mod the fusers of the MP4000/5000 etc. to use an oil roller rather than replacing the WAY over-engineered Cleaning web.
It calls for using an Aficio 1055 (P/N AE04 0051). The trouble is, it's been discontinued, and I'm having difficulty getting my hands on one. Is there another roller that can be used instead? C3500? or 3245C?

[TonerMunkeh]

Re: MP4000 Fusier Web Modification

You could try a 0042 from a Venus, that might fit.

[Moza]

Just remove it completely not realy any need for it on this machine

[jtymabel]

Re: MP4000 Fusier Web Modification

Just remove it completely not realy any need for it on this machine

i think you are correct. just checked on a customers machine, (they have been using it non stop for 2 months now) and i noticed that the whole web assy is missing. have not had any issues with the machine.

[sandmanmac]

Re: MP4000 Fusier Web Modification

Thanks for the input. Seems like we have a bit of a consensus here. I'll let it run without the web.

[Mad_Coachman]

Re: MP4000 Fusier Web Modification

I have a copy of a document that shows how to mod the fusers of the MP4000/5000 etc. to use an oil roller rather than replacing the WAY over-engineered Cleaning web.
It calls for using an Aficio 1055 (P/N AE04 0051). The trouble is, it's been discontinued, and I'm having difficulty getting my hands on one. Is there another roller that can be used instead? C3500? or 3245C?

AE040068 or AE040062

[khaled_abosere3@yahoo.com]

Re: MP4000 Fusier Web Modification

I have a copy of a document that shows how to mod the fusers of the MP4000/5000 etc. to use an oil roller rather than replacing the WAY over-engineered Cleaning web.
It calls for using an Aficio 1055 (P/N AE04 0051). The trouble is, it's been discontinued, and I'm having difficulty getting my hands on one. Is there another roller that can be used instead? C3500? or 3245C?

And you called you are supervisor
replace the web cleaning as in the service manual
again RTFM

[Eric1968]

Re: MP4000 Fusier Web Modification

And you called you are supervisor
replace the web cleaning as in the service manual
again RTFM

Yes, Supervisor!

Sandmanmac has contributed a lot to this forum, so I find your post quiet rude! And it looks like you've never replaced the cleaning web on this machine...



With these SP-settings you can extend the cleaning web life :

SP1902-03 (Web Motor Time) -> 1.5
SP1902-04 (Web Near End Setting) -> 95%

[sandmanmac]

Re: MP4000 Fusier Web Modification

Yes, Supervisor!

Sandmanmac has contributed a lot to this forum, so I find your post quiet rude! And it looks like you've never replaced the cleaning web on this machine...



With these SP-settings you can extend the cleaning web life :

SP1902-03 (Web Motor Time) -> 1.5
SP1902-04 (Web Near End Setting) -> 95%

Thanks Eric, and Go F**k yourself Khaled!

[Tonerbomb]

Re: MP4000 Fusier Web Modification

And you called you are supervisor
replace the web cleaning as in the service manual
again RTFM

Looking at sandmanmac's posts and rep, then looking at yours pretty much sums it up.... RED CARD for you !!!

[khaled_abosere3@yahoo.com]

Re: MP4000 Fusier Web Modification

ok

[Debs1964]

Re: MP4000 Fusier Web Modification

Fuck you Eric I have replaced this web many many times but your friend who called sandmanmac ask to replaced it in easy way not according to Fuck manual as you told me

And this, dear colleagues, is how to make friends and influence people

[joshuadenmark]

Re: MP4000 Fusier Web Modification

And this, dear colleagues, is how to make friends and influence people

There are 10 types of people in this world, those who understand binary maths and those who don't

like your signature, I get it 10

[Eric1968]

Re: MP4000 Fusier Web Modification

And this, dear colleagues, is how to make friends and influence people

I didn't saw his post. I guess he modified it. But I don't mind, it says enough about him...

I'm going to take a beer!

[slimslob]

Re: MP4000 Fusier Web Modification

I didn't saw his post. I guess he modified it. But I don't mind, it says enough about him...

I'm going to take a beer!

I didn't see it either. Apparently it has been removed. If Debs hadn't replied with quote, we wouldn't even know what he had said.