If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi friends,
sc364 in mpc2500 Vt high error of black TD sensor. I replaced black development unit, still pbm appears in alterrnative days and gets cleared by turning off and on the m/c. black development counter is 70k. what other possibilities?
1. Check the black, magenta, cyan, or yellow TD sensor connector
and harness between the TD sensor and PCU for damage.
2. Check the drawer connector.
3. Replace the defective PCU.
hi friends,
sc364 in mpc2500 Vt high error of black TD sensor. I replaced black development unit, still pbm appears in alterrnative days and gets cleared by turning off and on the m/c. black development counter is 70k. what other possibilities?
Leave a comment: