Lanier LD425C/Ricoh MPC2500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • blackdog
    Trusted Tech

    100+ Posts
    • Jun 2012
    • 211
    #1

    Lanier LD425C/Ricoh MPC2500

    Thanks for looking in.
    In particular to Doc Feeder DF3000, I replaced rollers and belt, when scanning at about the 10th pg. jams and there is a sheet under doc feeder with a about in inch
    fold from trail edge.
    Before I dismantle this unit I was wondering if there is anything you guys can point to which may correct this.
    Thanks..............
    Tags: 500, belt, doc feeder, lanier, mpc, mpc2500, ricoh, scan, scanning, unit
    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900
      #2
      Re: Lanier LD425C/Ricoh MPC2500

      Trail edge? I'd replace the Torque limiiter along with the sep roller
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

        Comment

        • blackdog
          Trusted Tech

          100+ Posts
          • Jun 2012
          • 211
          #3
          Re: Lanier LD425C/Ricoh MPC2500

          "JOMAMA" I Love It!
          Hey would you have a part # for Torque Limiter? I may have missed it. I did replace Sep Roller.

            Comment

            • Jomama46
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Apr 2008
              • 2900
              #4
              Re: Lanier LD425C/Ricoh MPC2500

              A294-6700. Good Luck
              sigpic
              You never realize how cheap a professional is until after you let an amateur do it.
              A+; Network +; PDI+

                Comment

                • blackdog
                  Trusted Tech

                  100+ Posts
                  • Jun 2012
                  • 211
                  #5
                  Re: Lanier LD425C/Ricoh MPC2500

                  I did miss that one. Replaced many of those on HP Printers.
                  Thanks again man you're an ace.

                    Comment

                    • kannuki2
                      Trusted Tech
                      250+ Posts
                      • Feb 2012
                      • 398
                      #6
                      Re: Lanier LD425C/Ricoh MPC2500

                      I would go back with a clutch. I haven't seen this model for a long time but those clutch always slipped on this model.

                        Comment

                        Previous template Next
                        Working...