[Misc] MP5000

[msmy]

Hi,

Today one of my machine give me massage in KOREAN language as below...
20130829_092836.jpg

and the machine do nothing!...

Could anyone please help me ....

thanks

[Polarbear]

Re: MP5000

Does it allow you access to SP mode? or Factory mode?

[msmy]

Re: MP5000

Does it allow you access to SP mode? or Factory mode?

No. Not at all...

[Polarbear]

Re: MP5000

No. Not at all...

User tools mode?

[msmy]

Re: MP5000

User tools mode?

No. There are no responds at all..
Maybe firmware problems?

[TonerMunkeh]

Re: MP5000

Check the dip switches on the controller board, someone may have flicked one by mistake?

[msmy]

Re: MP5000

Check the dip switches on the controller board, someone may have flicked one by mistake?

Could you please show me which one?

[skynetto]

Re: MP5000

Some poor translate but i think it has to do with memory problems.

Remove the memory has been canceled.
All memory is not deleted.
Make referee off the main power switch.
Repeat the operation.

[Polarbear]

Re: MP5000

I managed to convert your photo to Korean text.

This is Google Translate's version of what it is trying to say:

Remove the memory has been cancelled -
All memory is not deleted.
Make referee wheel off the main power switch.

To re-conditioning load switch Lu,
Make small eomul shown repeatedly.

Hope it helps.

[msmy]

Re: MP5000

I managed to convert your photo to Korean text.

This is Google Translate's version of what it is trying to say:

Remove the memory has been cancelled -
All memory is not deleted.
Make referee wheel off the main power switch.

To re-conditioning load switch Lu,
Make small eomul shown repeatedly.

Hope it helps.

Tq. But. I'm not really understand how to fix it. You help me a lot..