[Error Code] Ricoh aficio 7000cl

[khaled_abosere3@yahoo.com]

In the beginning the machine display sc 680 then i make memory clear and turned off power and then turned on again and print test print normally but after few seconds LCD display (Ricoh ipsio cx8200)
and also (reset fusing unit correctly).
for knowing the fusing unit is new.

[sandmanmac]

Re: Ricoh aficio 7000cl

In the beginning the machine display sc 680 then i make memory clear and turned off power and then turned on again and print test print normally but after few seconds LCD display (Ricoh ipsio cx8200)
and also (reset fusing unit correctly).
for knowing the fusing unit is new.

A memory clear!? Why?
I don't have the time or interest in beginning to tell you all of the new and exciting problems you've just created for yourself!

[JustManuals]

Re: Ricoh aficio 7000cl

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[Eric1968]

Re: Ricoh aficio 7000cl

In the beginning the machine display sc 680 then i make memory clear and turned off power and then turned on again and print test print normally but after few seconds LCD display (Ricoh ipsio cx8200)
and also (reset fusing unit correctly).
for knowing the fusing unit is new.

What you should do is READ THE F*CKING MANUAL!!

Especially read the section about SP5-801-001. Then you will discover that this isn't the way to solve problems!

SC680 could be a defective BCU Board, or a bad chip on one of the toner cartridges.

Good luck with the rest of the Service Calls and Errors!

[khaled_abosere3@yahoo.com]

Re: Ricoh aficio 7000cl

Problem has solved by replacing BCU board hhhhhhhhhhhhhhhhhhhhhhhhhhhh.

[Eric1968]

Re: Ricoh aficio 7000cl

Problem has solved by replacing BCU board hhhhhhhhhhhhhhhhhhhhhhhhhhhh.

Well, that's an expensive SP5-801-001.