MP3350 NVRam

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • luig
    Technician

    50+ Posts
    • Sep 2007
    • 52
    #1

    MP3350 NVRam

    Hi, I have an MP 3350 With Print scan where the NVram went bad. I replaced the NVram, but now I don't have the Print/scan option on the copier. This is not a basic model so therefore I don't have the print scan SD card. How can I make this copier back into a full functioning print/scan copier with color scanning? Or dose this copier now become a basic model?

    Thanks
    Luig

    What I have done:
    -test the copier with an NVRAM from a different copier
    -replaced the NVRam
    -tried to load the NVram info from a different copier
    Tags: 350, bad, color, copier, mp3350, print, rvram, scan, scanning, test
    • Eric1968
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2458
      #2
      Re: MP3350 NVRam

      What was the reason for replacing the NVRAM?

      Reloading the NVRAM from a different machine will never work because every machine has its' own specific settings.

      BTW, if you're having a Mp 3350B, then colour scanning is not possible. The scanner just can't do this.

        Comment

        • mikedci
          Trusted Tech

          100+ Posts
          • Jul 2010
          • 227
          #3
          Re: MP3350 NVRam

          When you replaced the nvram did you turn the NIC on? Set SP5985 to 1. Default is 0 = off.
          Hopefully you have the birth cert for the initial settings...
          Last edited by mikedci; 09-09-2013, 08:50 PM. Reason: Clarity

            Comment

            • luig
              Technician

              50+ Posts
              • Sep 2007
              • 52
              #4
              Re: MP3350 NVRam

              Originally posted by Eric1968
              What was the reason for replacing the NVRAM?

              Reloading the NVRAM from a different machine will never work because every machine has its' own specific settings.

              BTW, if you're having a Mp 3350B, then colour scanning is not possible. The scanner just can't do this.

              Hi Eric, thanks for your response. The reason for replacing the NVRAM, was due to the copier not coming to a "ready state" all the time sometimes when it did get to ready it would take 10 -15 minutes then it would code out, finally it stopped coming to ready.

              As far as the MP 3350, the copier was not a basic model, In Ricoh terms, the copier was a D020. But know with the replacement of the NVram the print/scan option does not appear as an option. In other word now I just have a plain copier.

                Comment

                • luig
                  Technician

                  50+ Posts
                  • Sep 2007
                  • 52
                  #5
                  Re: MP3350 NVRam

                  Originally posted by mikedci
                  When you replaced the nvram did you turn the NIC on? Set SP5985 to 1. Default is 0 = off.
                  Hopefully you have the birth cert for the initial settings...

                  Hi mikedci, Thank you for the info, that was it. Something so easy, but it did not cross my mind. Again thanks for your quick response.
                  PS - I did manage to get a report on a previous time that the machine booted up.

                    Comment

                    Previous template Next
                    Working...