MP C3501 Bates Stamp

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kwehner
    Technician
    • Mar 2009
    • 47
    #1

    MP C3501 Bates Stamp

    Does anyone know how to enable Bates Stamping on an MPC3501? It shows SP 5227-200 in the book but that SP is not on the machine. I have tried special SP mode as well. I know the old 90 cpm machines had Bates Stamp firmware that had to be loaded. Does this machine also need firmware?

    Thank you
    Tags: bates, bates stamping, book, c350, firmware, mpc, shows, sp mode
    • joshuadenmark
      #2
      Re: MP C3501 Bates Stamp

      Maby this can lead you in the right direction?


      Published 01/20/2009 08:37 PM | Updated 01/20/2009 08:37 PM
      Answer ID 99827 | FAQ ID 99802 | Rank B2
      How to enable the Bates Stamp Feature


      ENABLING THE BATES STAMP FEATURE:

      1. Turn on       SP 5-227-20012. Check the setting of SP5-227-201 3. Check the setting of SP5-227-202 0: excess zeros displayed (Factory Setting)1: no excess zerosUSING THE BATES STAMP FEATURE:1. In Copier Mode, press [Edit / Stamp].2. Press [Stamp]3. Press [ Stamp Text].

      4. Setting up Bates Stamping requires setting up components:a. <Text > b. <Numbering from / to >

      5. In <TextChange Text
      6. Type in text component (you can include spaces if required).

      7. Select       [ Ok].

      8. In <Numbering from / to> field, select [Change Start No.].

      9. Type in the number that you want to begin from.

      10. Select       [ #].

      11. Select [Ok].

      12. To change the position of the stamp on the printed page, select [Change] and select the appropriate location. The position shown here is the upper right hand corner.

      13. Press the [Start] button to begin the job.
      Notes:
       Bates Stamping can only be used in copy mode.
       Bates Stamping cannot be used for files saved in the Document Server.
       The location of this stamp may be positioned in the following areas: lower right; lower left; upper right;upper left and middle.

        Comment

        • kwehner
          Technician
          • Mar 2009
          • 47
          #3
          Re: MP C3501 Bates Stamp

          Thank you for the reply. I have that, the problem is SP 5227-200 is not in the machine. I am thinking it needs firmware for Bates stamp first, maybe even custom firmware from Ricoh. You needed firmware to enable Bates stamp on the B070 series machines. I do not have access to the Ricoh site to check.

            Comment

            • joshuadenmark
              #4
              Re: MP C3501 Bates Stamp

              Originally posted by kwehner
              Thank you for the reply. I have that, the problem is SP 5227-200 is not in the machine. I am thinking it needs firmware for Bates stamp first, maybe even custom firmware from Ricoh. You needed firmware to enable Bates stamp on the B070 series machines. I do not have access to the Ricoh site to check.
              Will check right away.

                Comment

                • joshuadenmark
                  #5
                  Re: MP C3501 Bates Stamp

                  A search on "bates" gave zero result and the page above is the only item found in Tier2 knowledge base , sorry

                    Comment

                    Previous template Next
                    Working...