[Error Code] Pro1357ex replacement of c/unit fusing unit req'd

[katash]

Hello all, is there away of resetting this code, i have tried to reset all other parameters of PM reset as i have ordered a new unit yet to arrive,is it advisable to update the firmware to get rid of this? kindly assist!

[bobbykerr]

Re: Pro1357ex replacement of c/unit fusing unit req'd

Sp 1902 -1 but you will need to change the web first if it's run out

[JustManuals]

Re: Pro1357ex replacement of c/unit fusing unit req'd

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[Tonerbomb]

Re: Pro1357ex replacement of c/unit fusing unit req'd

Sp 1902 -1 but you will need to change the web first if it's run out

bobbykerr is right on this, change the web and reset sp 1902-1. Firmware does nothing for this.....

[katash]

Re: Pro1357ex replacement of c/unit fusing unit req'd

thank you for the input,found the fault which was the web was becoming loose causing the feeler activate the sensor that it has run out