MP 5500 with SC 553

[joshuadenmark]

Re: MP 5500 with SC 553

The newest firmware I got on my pc is this, ready to use just unzip:

https://drive.google.com/folderview?id=0B5CZi6WdSVtuQW5zQnA0eGcyMFU&usp=sharing

[Herostrat]

Re: MP 5500 with SC 553

Updating FW at this moment,I loaded engine FW and reboted machine to load System/Copy,gave me SC 553 after I reboted.Now I'm loading System/Copy with SC on...hope it will fix it.

[Herostrat]

Re: MP 5500 with SC 553

Nope,still no dice.
Engine is 1,16,60
System/Copy is 3,08

[Bantams]

Re: MP 5500 with SC 553

You are using sp5-810 to reset the SC code I assume.

[Vollegaaz]

Re: MP 5500 with SC 553

You are using sp5-810 to reset the SC code I assume.

not needed for this engine, just entering system SP and then switch the machine off will do the trick.

[Herostrat]

Re: MP 5500 with SC 553

Yes yes SP 5801-002,engine reset,I updated FW and waited for a while,code still poping out.
It's boards swapping time.

[Herostrat]

Re: MP 5500 with SC 553

I swaped PSU board and it's working just fine.
Before I did that I checked out fuser temperature and noticed that it goes above it's default values,both center and end thermistor goes about 10 to 15 degrees above default.