Hello everyone, I have a Ricoh PRO C900S with an error code SC254. I believe this is an error with the yellow DV unit or ID senor. Any direction or additional information that I may correct this issue would be awesome!
-
-
Re: Ricoh PRO C900S SC254 error... help!
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Paul@justmanuals.com -
Re: Ricoh PRO C900S SC254 error... help!
Assuming you have not just got this after working on the rear control box, it will be LD2 (laser diode) for yellow faulty.Comment
-
Re: Ricoh PRO C900S SC254 error... help!
The early production 900's had an issue with the LD's, in which Ricoh had a replacement program at that time.Mystic Crystal RevelationsComment
-
Re: Ricoh PRO C900S SC254 error... help!
Thanks for the input. I did receive this machine with the rear controller and power supply de-installed. I installed the aforementioned parts and triple checked the connectors next to a known working model. The machine starts to power up, then codes out after a minute or so.Comment
-
Re: Ricoh PRO C900S SC254 error... help!
Make sure looms with Black cable tie go to bottom section. CN413,411,412 = upper CN416,414,415 = lowerComment
-
Re: Ricoh PRO C900S SC254 error... help!
Thanks a million Gamut, that was spot on!! I swapped those cables and it came up after a 6 minute warm up... Your the best, techs rule!!!!Comment
Comment