Ricoh mp c2500 dont add yellow toner please help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • m_donakov
    Trusted Tech

    100+ Posts
    • Jan 2010
    • 213

    #1

    Ricoh mp c2500 dont add yellow toner please help

    Hi to all i have Ricoh mp c2500 dont yellow add toner please help a already
    - change pcu unit, change toner pump, change toner bottle clutch, vacum out all toner pipes and clean toner sensor, tried 4 diferent bottles with original and not original toner. Clear all setings and put agean no standart seting, and still the problem is here. Plesse any help


    Thanks
    Mile
  • Dhearn
    Technician
    • Jul 2013
    • 24

    #2
    Replace the RFID board

    Comment

    • Dhearn
      Technician
      • Jul 2013
      • 24

      #3
      Make sure that no empty toner bottles are near the machine.

      Comment

      • JustManuals
        Field Supervisor

        5,000+ Posts
        • Jan 2006
        • 9838

        #4
        Re: Ricoh mp c2500 dont add yellow toner please help

        This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:





        Paul@justmanuals.com

        Comment

        • joshuadenmark

          #5
          Re: Ricoh mp c2500 dont add yellow toner please help

          1. Lack of developer.

          2. Broken dev. drive gear, in the machine.

          Comment

          • Codex
            Senior Tech

            500+ Posts
            • May 2008
            • 701

            #6
            Re: Ricoh mp c2500 dont add yellow toner please help

            i remember a tech bulletin for this.....toner pump problem........you have to replace the toner pump, and check the toner tubes , sometimes there is a problem on the tubes......sometimes the tubes are pressed against the chassis.
            Memento Audere Semper

            Comment

            • joshuadenmark

              #7
              Re: Ricoh mp c2500 dont add yellow toner please help

              Originally posted by Codex
              i remember a tech bulletin for this.....toner pump problem........you have to replace the toner pump, and check the toner tubes , sometimes there is a problem on the tubes......sometimes the tubes are pressed against the chassis.
              Hmm, you dindn't really read the first post

              Comment

              • ruben
                The New Guy

                1,000+ Posts
                • Oct 2012
                • 1203

                #8
                Re: Ricoh mp c2500 dont add yellow toner please help

                Turn off toner end detection, then try again. If it works, turn it back on.

                Comment

                • Sweden_GBG
                  Technician
                  • Nov 2012
                  • 74

                  #9
                  Re: Ricoh mp c2500 dont add yellow toner please help

                  I once had this problem... the only thing that worked for me was nvram clear... you can save nvram-data and then just try the memory clear.. if it dont work, just download your saved data..

                  Comment

                  • Llama God
                    Service Manager

                    1,000+ Posts
                    • Mar 2009
                    • 1353

                    #10
                    Re: Ricoh mp c2500 dont add yellow toner please help

                    Originally posted by Sweden_GBG
                    I once had this problem... the only thing that worked for me was nvram clear... you can save nvram-data and then just try the memory clear.. if it dont work, just download your saved data..
                    Oh dear lord...

                    Comment

                    • m_donakov
                      Trusted Tech

                      100+ Posts
                      • Jan 2010
                      • 213

                      #11
                      Re: Ricoh mp c2500 dont add yellow toner please help

                      Originally posted by Dhearn
                      Replace the RFID board

                      Tried and still the same

                      Comment

                      • Zeldaman
                        Senior Tech

                        500+ Posts
                        • Mar 2011
                        • 946

                        #12

                        Comment

                        • m_donakov
                          Trusted Tech

                          100+ Posts
                          • Jan 2010
                          • 213

                          #13
                          Re: Ricoh mp c2500 dont add yellow toner please help


                          Tried with new pump and new pipe, nvram clear tried, and what is DV-Box?


                          Thanks

                          Comment

                          • Zeldaman
                            Senior Tech

                            500+ Posts
                            • Mar 2011
                            • 946

                            #14
                            Re: Ricoh mp c2500 dont add yellow toner please help

                            Hi there!
                            The pcdu has 2 parts: the pcu (drum,cb,chargeroller...) & the dv-box (magroller, td-sensor...). When there is to little developer in it or the td-sensor is making false measurements you have such problems ( often without sc-codes). But as said before, it can also be the gear-box (had this once).
                            Greetings...

                            Comment

                            • m_donakov
                              Trusted Tech

                              100+ Posts
                              • Jan 2010
                              • 213

                              #15
                              Re: Ricoh mp c2500 dont add yellow toner please help

                              Originally posted by Zeldaman
                              Hi there!
                              The pcdu has 2 parts: the pcu (drum,cb,chargeroller...) & the dv-box (magroller, td-sensor...). When there is to little developer in it or the td-sensor is making false measurements you have such problems ( often without sc-codes). But as said before, it can also be the gear-box (had this once).
                              Greetings...

                              I cahnge all Unit take from working machine and put it same problem, and you think gear box to developer unit? i dont think on that but i will check

                              Thanks

                              Comment

                              Working...