Screen Service Mode on Ricoh SOP

[iamthecage]

How do you get into Screen Service Mode on the Ricoh Smart Op Panels? The information I found on the TSRC portal says to use Reset, 8,0,6,1,8,2,#,#, Then Press and Hold the "Clear" button for more then 3 seconds. That doesnt pull anything up though.

[JustManuals]

Re: Screen Service Mode on Ricoh SOP

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:

http://www.justmanuals.com

Paul@justmanuals.com

[ruben]

Re: Screen Service Mode on Ricoh SOP

Have not used a Smart Op, but if you can get access to a virtual keypad it should be C/A (yellow) 806182 C (not red).

[Tonerbomb]

Re: Screen Service Mode on Ricoh SOP

How do you get into Screen Service Mode on the Ricoh Smart Op Panels? The information I found on the TSRC portal says to use Reset, 8,0,6,1,8,2,#,#, Then Press and Hold the "Clear" button for more then 3 seconds. That doesnt pull anything up though.

use the keypad from the copy function. PM'ed you the rest.

[Tonerbomb]

Re: Screen Service Mode on Ricoh SOP

How do you get into Screen Service Mode on the Ricoh Smart Op Panels? The information I found on the TSRC portal says to use Reset, 8,0,6,1,8,2,#,#, Then Press and Hold the "Clear" button for more then 3 seconds. That doesnt pull anything up though.

I just tried this and I got right into SOP service mode. You might take a look at the readme files for the .apk files also, it explains how to setupthe sd card.