[Jamming] RICOH MPC 6000

[khattab.al.masry]

Our problem concentrated on that :
1- when copying on A4 (thick paper) on glass paper (face up) or (face down) no jamming.
2- when printing on the same A4 (thick paper) jamming occur at fusing unit .
We ask if there any edit with service program to solve this problem.
Thank you for your corporation.

[Eric1968]

Re: RICOH MPC 6000

You need to provide more info about this problem. What's the paper weight? Did you set the correct paper weight? From which tray are you printing? What jam codes are registered in the jam history?

[turbojetboy]

Re: RICOH MPC 6000

I would be having a good look at the erase margins between the 2 modes of operation you describe. Also the stripper plate on this model is very troublesome and can cause a lot of fuser jams, also you need to replace th oil and cleaning rollers at no more than 80k (in my opinion).

[Llama God]

Re: RICOH MPC 6000

You need to provide more info about this problem. What's the paper weight? Did you set the correct paper weight? From which tray are you printing? What jam codes are registered in the jam history?

Can't you read? It's glass paper.

[slimslob]

Re: RICOH MPC 6000

Can't you read? It's glass paper.

Think he forgot to pt a comma after glass. Good grammer always makes easier for us to help them.

[Eric1968]

Re: RICOH MPC 6000

Can't you read? It's glass paper.

I think I thought that he meant glossy paper. After reading it again, you're right!

[khattab.al.masry]

Re: RICOH MPC 6000

I think I thought that he meant glossy paper. After reading it again, you're right!

Sorry, I meant when using original glass paper

[slimslob]

Re: RICOH MPC 6000

I think I thought that he meant glossy paper. After reading it again, you're right!

I read it as though there was a comma after the word glass. "(Original) on (the) glass, (original) paper". I think if he had just omitted the word paper.

[CSI]

Re: RICOH MPC 6000

Warning! between copying and printing sheet does not come out in the same direction.
In printing it is returned to a pocket in the furnace exit. Your problem doesn't it come from there?

[Llama God]

Re: RICOH MPC 6000

Sorry, I meant when using original glass paper

Oh, that's much clearer now.

[Tonerbomb]

Re: RICOH MPC 6000

Our problem concentrated on that :
1- when copying on A4 (thick paper) on glass paper (face up) or (face down) no jamming.
2- when printing on the same A4 (thick paper) jamming occur at fusing unit .
We ask if there any edit with service program to solve this problem.
Thank you for your corporation.

Did you check your paper tray setup on the machine and the driver??

You need to provide more info about this problem. What's the paper weight? Did you set the correct paper weight? From which tray are you printing? What jam codes are registered in the jam history?

X2!

Can't you read? It's glass paper.

That's not in the spec's for this machine!!

Sorry, I meant when using original glass paper

Is this on the glass or instead of recycled glass paper??

Warning! between copying and printing sheet does not come out in the same direction.
In printing it is returned to a pocket in the furnace exit. Your problem doesn't it come from there?

furnace exit??, there is a fuser exit. if the specified tray is long edge feed it comes out LEF for either function ..........

Oh, that's much clearer now.

yes much clearer now.............................

seriously what are the jam codes that are logged, and what is the paper GSM ???

[DIONISIS]

Re: RICOH MPC 6000

try to9 select OHP mode to the bypasstray(only face up exit)