[Error Code] mp2500 error code sc203

[berg77]

Already change board and laser unit but still problem...

[Richariri]

Re: mp2500 error code sc203

Already change board and laser unit but still problem...

Did you change them both at the same time?

if you changed the board then tested before changing the laser unit then you could of caused the new board to get the fault


and... make sure all the connecters and wires haven't been pinched by anything and/or disconnected.

[JustManuals]

Re: mp2500 error code sc203

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:

http://www.justmanuals.com

Paul@justmanuals.com