Lanier LD035 cross to ?Ricoh?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gar the pilot
    • May 2025

    #1

    Lanier LD035 cross to ?Ricoh?

    My local habitat has a Lanier LD035 donated and wants me to take care of it. Which Ricoh does this cross to? The copier looks Okay and only had a problem with drawer size not reading right. seems touchie. It has CC 539K and used-to have a sorter, ( I am not sorry thats gone.) They got 2 extra toners so this should have enough supplies for 2-3 years. Any bad habits?
    Thanks
    Gar the (Grounded due to snow) Pilot.
  • ruben
    The New Guy

    1,000+ Posts
    • Oct 2012
    • 1203

    #2
    Re: Lanier LD035 cross to ?Ricoh?

    According to Goose's Guide, the LD035 is a Ricoh Aficio 2035.

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: Lanier LD035 cross to ?Ricoh?

      A Great resource here:



      Paul@justmanuals.com

      Comment

      • Gar the pilot

        #4
        Re: Lanier LD035 cross to ?Ricoh?

        Sorry Paul, Just remembered I have a copy of the Ricoh 2035 Manuel,.. I just didn't know the cross reff.
        Thanks all
        Gar

        Comment

        • Iowatech
          Not a service manager

          2,500+ Posts
          • Dec 2009
          • 3930

          #5
          Re: Lanier LD035 cross to ?Ricoh?

          Still, Paul's link is a good reference to check what rebadged machines really are, as a Lanier tech I came across that a few years ago and found it very useful.

          Comment

          • JustManuals
            Field Supervisor

            5,000+ Posts
            • Jan 2006
            • 9838

            #6
            Re: Lanier LD035 cross to ?Ricoh?

            I use that Katun site almost daily to look up an equivalent machine that I don't have a service manual for. Usually the parts manual isn't useful from a different manufacturer but at least you'll have the part's name. A very valuable resource indeed.

            Paul@justmanuals.com

            Comment

            Working...