Lanier 328c Black Drum Install

[doug]

Hi guys,
When replacing black drum on a lanier 328c color copier, do i have to reset or initialize the drum through the soft switches?
Thanks
Doug

[sandmanmac]

Re: Lanier 328c Black Drum Install

Hi guys,
When replacing black drum on a lanier 328c color copier, do i have to reset or initialize the drum through the soft switches?
Thanks
Doug

Do SP5-999-001 (new unit set).
Power off machine. Install new PCU. Power on, and PCU initialization is done

[doug]

Re: Lanier 328c Black Drum Install

Do SP5-999-001 (new unit set).
Power off machine. Install new PCU. Power on, and PCU initialization is done

Thank you! I greatly appreciate that information.
Doug

[Drummer]

Re: Lanier 328c Black Drum Install

Make sure you push the "ok" for the particular unit, I made the mistake before when replacing multiple units at once of going into the sp and executing but not touching ok after each one. Only the ones that "ok" was pressed on initialize.

[doug]

Re: Lanier 328c Black Drum Install

Make sure you push the "ok" for the particular unit, I made the mistake before when replacing multiple units at once of going into the sp and executing but not touching ok after each one. Only the ones that "ok" was pressed on initialize.

Thank you for this information, this would be something i would do in a hurry!
Doug