[Misc] Pro c900 fiery controller

[katash]

HEY PEOPLE!,

sorry to ask but this machine i bought in german language and can make it print nor scan!

is the firmware update to change the language G1785980B?
KINDLY confirm as dont want to mess and out of kindness please!

by the way i can ping and get a response,

thanks and regards

[tinnyjay]

Re: Pro c900 fiery controller

HEY PEOPLE!,

sorry to ask but this machine i bought in german language and can make it print nor scan!

is the firmware update to change the language G1785980B?
KINDLY confirm as dont want to mess and out of kindness please!

by the way i can ping and get a response,

thanks and regards

I am a little familiar with fiery and if your c900 uses a fiery as usually you have to reset to factory default and when it boots up it asks for language you want to use.
If it asks for a password to reset to factory defaults i think its FIERY.1
After reset you have to configure step by step and if you have no idea what to do then,better use in german language.

[katash]

Re: Pro c900 fiery controller

I am a little familiar with fiery and if your c900 uses a fiery as usually you have to reset to factory default and when it boots up it asks for language you want to use.
If it asks for a password to reset to factory defaults i think its FIERY.1
After reset you have to configure step by step and if you have no idea what to do then,better use in german language.

THANKS tinnyjay,

will try that and let you know,
thanks again

[katash]

Re: Pro c900 fiery controller

I am a little familiar with fiery and if your c900 uses a fiery as usually you have to reset to factory default and when it boots up it asks for language you want to use.
If it asks for a password to reset to factory defaults i think its FIERY.1
After reset you have to configure step by step and if you have no idea what to do then,better use in german language.

hi tiijay,

i have gone blank with the drivers for windows 7/8,

kindly assist with the drivers for printing if you can i don't know why its not printing though i can ping the machine and installed on a win 7 platform,is there another way of installing?
win8 64 bit.


i will really appreciate,

[tinnyjay]

Re: Pro c900 fiery controller

hi tiijay,

i have gone blank with the drivers for windows 7/8,

kindly assist with the drivers for printing if you can i don't know why its not printing though i can ping the machine and installed on a win 7 platform,is there another way of installing?
win8 64 bit.


i will really appreciate,

From Fiery print configuration page and see the server name,not server ip adress because if you use dhcp in fiery every time you restart printer,ip adress will be different.Server name is the same everytime
When you add printer from win 7/8 in the printer ip you put fiery server name.
Drivers for windows 7 32bit/64bit are here :http://support.ricoh.com/bb/pub_e/dr...0/z62775en.exe
Drivers for windows 8 32bit/64bit are here :http://support.ricoh.com/bb/pub_e/dr...0/z62775en.exe
Here you have the link for all pro c900 drivers : http://support.ricoh.com/bb/html/dr_...0f/c900fen.htm
Here you have Command Workstation that you will need a lot and helps to print and configure server as you want : https://d1umxs9ckzarso.cloudfront.ne...re-Manager.exe
Default username for fiery is admin and password is Fiery.1

[katash]

Re: Pro c900 fiery controller

From Fiery print configuration page and see the server name,not server ip adress because if you use dhcp in fiery every time you restart printer,ip adress will be different.Server name is the same everytime
When you add printer from win 7/8 in the printer ip you put fiery server name.
Drivers for windows 7 32bit/64bit are here :http://support.ricoh.com/bb/pub_e/dr...0/z62775en.exe
Drivers for windows 8 32bit/64bit are here :http://support.ricoh.com/bb/pub_e/dr...0/z62775en.exe
Here you have the link for all pro c900 drivers : http://support.ricoh.com/bb/html/dr_...0f/c900fen.htm
Here you have Command Workstation that you will need a lot and helps to print and configure server as you want : https://d1umxs9ckzarso.cloudfront.ne...re-Manager.exe
Default username for fiery is admin and password is Fiery.1

woow!
thanks tinnyjay,
please clarify as i went to ip4 and set the ip and subnet mask on the system-interface settings and the same to fiery i set the same ip but did not on the server as the site the monster is located i set a switch so no server,does this mean it has to be connected to a server?by the way the language is still german but i google the translation(hehehehe)

your really are a sport!please forgive me as this is my first time to see this monster!a challange it is,

thanks for your support!

[tinnyjay]

Re: Pro c900 fiery controller

woow!
thanks tinnyjay,
please clarify as i went to ip4 and set the ip and subnet mask on the system-interface settings and the same to fiery i set the same ip but did not on the server as the site the monster is located i set a switch so no server,does this mean it has to be connected to a server?by the way the language is still german but i google the translation(hehehehe)

your really are a sport!please forgive me as this is my first time to see this monster!a challange it is,

thanks for your support!

Glad to help you