lanier ld160c installation on IMac

[apicsec]

i just purchashed new IMac 10.6 and need to connect to a Lanier copier LD160c...downloaded driver from site...WHERE DO I GO FROM HERE?

[qbert69]

Re: lanier ld160c installation on IMac

...does the machine have the postscript option on it?

...did you download the postscript driver for your mac?

If both of the above hold true, unzip the print driver to install it into your system, go to your system settings, printers & faxes, and add the printer as an LPD printer with the IP address if it is hooked up via ethernet. If it is USB, choose USB. Make sure the IP is static on the printer if using ethernet. I wouldn't recommend you use bonjour for adding the printer either...I have had some issues with it.


Good Luck!