mp9000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vargue
    Trusted Tech

    250+ Posts
    • Oct 2011
    • 404

    #1

    [Error Code] mp9000

    hi fellas yesterday i went to customer have problem with double feed sensors .first machine work about9k and then stop working and restart message revealed i closed and open then show history sc it's 585 i cleaned double feed sensors upper and lower then working good about 12k without any troubles .it's some times duplex disappear form panel then i must restarted agian. did that machine need to upgrade firmware.
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37489

    #2
    Re: mp9000

    High dust location or high lint content paper will cause sensors to get dirty quickly.

    Comment

    • Moza
      Service Manager

      100+ Posts
      • Feb 2009
      • 232

      #3
      Just disable double feed sensors as they cause more problems than good.

      Loosing duplex option could be hard drive as sc585 is a category C code so wont stop the machine functioning

      Comment

      Working...