GRIFFIN fusergears

[Zeldaman]

Hi there!
4 machines in 2 weeks making noise like hell & crapy prints: the gears of the fuser (PN AB012072,AB012076,AB012077) are really crap! The ones on the pictures last 20K prints!!! The only "good" thing is, that they are easy to change.
Have a nice weekend.
Greetings...

[Richariri]

Re: GRIFFIN fusergears

Just had a call with this fault 5 minutes ago.

The bearing was grinding making a horrible noise and that gear had the beginning of a wear mark after 20K

Those pictures though, I have never seen a fuser that dirty. even when doing a rebuild on one that's done twice it's life.


Ive recently started putting a tiny bit of thermal grease on that gears teeth as an effort to reduce friction and stop them breaking.

[copymutt]

Re: GRIFFIN fusergears

What model of machine please?

[KapeKopyTek]

Re: GRIFFIN fusergears

I had a Savin MPC6055 fuser gears did the same thing a month ago, and made a hell of a mess. Hope to get more than 20k out of them, they were a butch to change.

[CSI]

Re: GRIFFIN fusergears

wednesday a MP C305 SPF with 14538 pages color and 9501 pages black :

20140409_093711_resized.jpg 20140409_093818_resized.jpg 20140409_093921_resized.jpg

[Klydon]

Re: GRIFFIN fusergears

What model of machine please?

MPC 305.

Gears are garbage on this machine. If you have any number of them, keep them in inventory if you can. You will need them.