MP 7000 Duplex Jamming well below relay sensor

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • saa
    Technician
    • Apr 2014
    • 10
    #1

    [Jamming] MP 7000 Duplex Jamming well below relay sensor

    Hello Dear

    MP 7000 duplex jamming single page well below relay sensor or B2 guide lever.
    interchange with other duplex unit. No issue with duplex unit.
    Relay sensor also ok.
    Even one duplex page jamming from all tray.

    Thanks
    Last edited by saa; 04-19-2014, 09:48 AM.
    Tags: None
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37493
      #2
      Re: MP 7000 Duplex Jamming well below relay sensor

      Can you tell us what the jam code is?

        Comment

        • saa
          Technician
          • Apr 2014
          • 10
          #3
          Re: MP 7000 Duplex Jamming well below relay sensor

          Originally posted by slimslob
          Can you tell us what the jam code is?
          Jam code is 12 middle sensor

            Comment

            • TonerMunkeh
              Professional Moron

              2,500+ Posts
              • Apr 2008
              • 3865
              #4
              Re: MP 7000 Duplex Jamming well below relay sensor

              How many has this thing done? If it's 600k+ I'd be looking at reg mylars, leaking dev unit contaminating feed stations, dirty reg sensor or damaged bearings either side of the reg roller. Pull the reg unit and examine it, can't hurt to have a look. Also check the duplex connector for paper scraps.
              It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

              Hit it.

                Comment

                Previous template Next
                Working...