Reset digital counter of Ricoh -Aficio 3035/3045

[PA3040]

Dear All
Please advice, is there any way to reset the digital counter of Aficio 3035/4045 machine
Thanks i advance

[sandmanmac]

Re: Reset digital counter of Ricoh -Aficio 3035/3045

Dear All
Please advice, is there any way to reset the digital counter of Aficio 3035/4045 machine
Thanks i advance

Why? Because you are reselling it, and want to misrepresent to the buyer how many copies are actually on the machine?
You're in the wrong place if you joined here to get advice on ways to cheat, and mislead people!

[PA3040]

Re: Reset digital counter of Ricoh -Aficio 3035/3045

It has made 630k copies from last counter and now NVRAM and controller board is missing
new controller board has deferment counter as per technical officer

[ruben]

Re: Reset digital counter of Ricoh -Aficio 3035/3045

If you have placed a new NVRAM on the machine then the only way is by doing 999 copies 630 times. Or, just forget about it, this machine is almost dead at that value.

[PA3040]

Re: Reset digital counter of Ricoh -Aficio 3035/3045

Why? Because you are reselling it, and want to misrepresent to the buyer how many copies are actually on the machine?
You're in the wrong place if you joined here to get advice on ways to cheat, and mislead people!

Really i not need to mislead the people, since i am MCU's programmer, I know how read the EEPROM and simply modify the counter memory address. as well as chip re-setters are advertising this forum, this is also cheat to the OEM.

I thought it may have the system using factory mode

Hoped you will understand

[PA3040]

Re: Reset digital counter of Ricoh -Aficio 3035/3045

If you have placed a new NVRAM on the machine then the only way is by doing 999 copies 630 times. Or, just forget about it, this machine is almost dead at that value.

Thanks for the reply

Do you have same experience?