MPC2800

[GeorgeBest]

Trying to change the complete duplex unit,
How is the unit released from the holders, can't see the tric, manual gives no solution

anyone ?
Thanks in advanceefoto.JPG

[Elmo]

Re: MPC2800

You need to move the metal pin to the right it is spring loaded

[Richariri]

You need to push and hold the little white plastic button in. This will release the hinge/pin and allow you to wiggle it out of the hole. Dont force it, its just a little stiff

Make sure you disconnect the wiring harness before removing.

The attached picture shows the little button.

[turbojetboy]

Re: MPC2800

I would also take the entire duplex cover off beforehand (4 screws) and then you can easily manage the big spring and release the duplex with ease.